Building entries Multi-line building entriesThrough the wall - wall already exists

Basic variant with inner seal for district heating

for buildings with a basement

MSH FW Basic GV2

Add to wish list

Basic variant with inner seal for district heating - for buildings with a basement

Visual and physical installation control thanks to integrated inspection opening
integrated leak test equipment for double walls/element walls for certainty during installation

Gastight and watertight building entry for district heating, water, power and telecommunications services. Basic variant 2 with inner seal 60 mm sealing width. As this is a modular system, the outer seal can be freely selected as appropriate for the type of wall.

Facts

Advantages:

Seals all supply lines through one entry
Continuous duct connection up to the main supply lines at the edge of the property possible
All services are fed in and sealed separately
The arrangement of the individual services is flexible

Scope of delivery:

1 piece of Inner seal
5 pieces of sleeve pipes
1 piece of test valve (pre-mounted)
4 M8x45 screws for district heating sealing elements
6 pieces M8x50 screws for rafter sealing elements

Dimensions:

Inner seal with 60 mm sealing width
Compatible with core drill/wall sleeve: ID: 298 mm - 303 mm
Maximum wall thickness: 500 mm (special lengths on request)

Properties:

Also required: closed sealing elements and an or several outer sealing elements (as appropriate for wall type)
Module 6 (outer sealing element with 90 mm sealing surface) produces a variant that can be tested in applications in double walls/element walls